|
|
|
|
|
|
|
Description:
| |
|
Marble Polish 9720
for Marble care is a ready to use polish for interior floors of marble, limestone, and terrazzo. It is designed to be used with either 00 or 000 steel wool pads in a spray cleaning operation using rotary floor buffer. Marble Polish 9720 remove minor scratches and produces a moderate to high gloss finish. Frequency of use depends upon wear, traffic patterns and desired appearance. For daily cleaning use Marble Care 9670 Neutral, No Rinse, No Residue Cleaner. |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
Excellent cleaner. Ready to use. Compatible with a wide variety of marble, limestone, and terrazzo. Produces a durable surface. Creates a slip resistant surface. Does not contain wax. Does not require stripping. |
|
|
|
|
|
|
|
|
|
|
|
How and when to use: |
|
|
Use with 00 or 000 steel wool pads in a spray cleaning operation with a rotary floor buffer. Used on floors with a dull appearance to increase gloss. May be used on floors to clean and maintain appearance levels on a daily basis.
|
|
|
|
|
|
|
|
|
|
|
|
Directions for Use:
|
|
|
Marble is a natural substance. Chemical reactivity can vary greatly. Test on an inconspicuous area before using.
Marble Polish 9720 for Marble care is a ready to use product, do not dilute.
Safety glasses, a dust mask, and rubber gloves must be worn when using this product. |
|
|
|
|
|
|
|
|
|
|
| |
The first application: |
|
|
Cleaning the floor: |
|
|
 |
|
IMPORTANT! Before applying the first application of
Marble Polish 9720 for Marble care, the floor must be completely clean to remove any wax, dirt, and sealer. |
|
|
Strip the floor using Marble Care 9690 Marble Sealer Stripper |
|
|
If the floor has visible groutuse a stiff brush and Genkleen 9700 Grout Clean to clean the grout. |
|
|
After stripping, rinse the floor twice with clean water and a clean mop. Allow the floor to dry completely. |
|
|
Clean the machine to remove any stripper. |
|
|
|
Polishing the floor: |
|
|
|
|
Shake the large container Of Marble Care 9720 and fill a spray bottle. Adjust the spray nozzle to a slight stream spray. Shake the bottle often during use. |
|
|
Apply product to the floor with a trigger spray bottle. Apply only enough product to uniformly cover the area selected |
|
|
Place a clean steel wool pad under the floor buffer. As the pad becomes wet and loaded with polish, turn over or change |
|
|
Apply Marble Polish 9720 to the floor, then buff with a side to side motion until dry. Overlapping areas already polished. Move to an adjacent area and repeat. Rotate in four sections until l the desired shine appears. Then move to four new sections. NOTE: if the floor does not have a high gloss after three applications of Marble Polish 9720, the floor may not have been cleaned adequately or it was no completely dry. |
|
|
For the first application, at least three treatments will be needed to obtain the desired shine. The best results have been obtained obtained when the floor has a good shine and feels slightly sticky when walked on. CAUTION! Do not over buff. Buffing dry may cause the floor to be slippery |
|
|
After polishing, buff the corners by hand with a small steel wool pad to remove any residue and to even out the shine |
|
|
|
|
|
|
Before using read the MSDS for precautions!
WARNING: Contains magnesium silicoflouride. Avoid contact with yes or skin. Use only with rubber gloves, a dust mask, and safety glasses. |
|
| |
FIRST AID: Call physician immediately. SKIN: Wash with soapy water. Clean under finger nails. EYES: Flush with water for 15 minutes. Call physician. INGESTION: Drink large amounts of water followed with mineral oil or egg whites. Call physician. INHALATION: Move person to fresh air. If unconscious call physician.
|
|
| |
Container disposal: Rinse container three times with water. Then offer for recycling, or reconditioning, or in a sanitary land fill (dump), or if allowed by state and local authorities or by incineration. Stay away from the smoke.
KEEP AWAY FROM CHILDREN. |
|
|
|
|
|
|
 |
|
General Chemical Corp.
12336 Emerson Dr.
Brighton, Michigan(MI.)
48116, USA |
| USA: |
866-623-5600 |
| Overseas: |
248-587-5600 |
| Fax : |
248-587-5606 |
|
 |
|
 |
|
 |
|
|
|
|
