|
Marble Care No Rinse, No residue Neutral Marble and Tile Cleaner 9670
| |
|
General Chemical’s No Rinse, No Residue Neutral Marble and Tile Cleaner 9670 is a daily use, pH 7, user friendly, environmentally safe cleaner formulated to clean marble, granite limestone, agglomerate, terracotta, and terrazzo and other stone surfaces without harming the crystalline structure. It will not etch, dull, corrode, or scratch any stone surface. It is designed to be used in automatic scrubbers, power washers, or may be used with a mop or sponge. No Rinse, No residue Neutral Marble and tile Cleaner 9670 can be used on both interior and exterior surfaces. |
|
|
 |
|
Use only in well ventilated areas |
|
|
Dust mop, sweep, or vacuum the floor to remove any lose dirt. |
|
|
Mix 1 part No Rinse, No Residue, Neutral Marble and Tile Cleaner 9670 with 16 parts water(approximately I cup to 1 gallon of water) for routine cleaning. To eliminate foaming add the cleaner to water. |
|
|
Damp mop the floor with a clean mop used only for this purpose. |
|
|
Allow the floor to dry completely before allowing any foot traffic. If water streaks occur buff with a soft cloth |
|
|
Every 2 to 3 months clean the grout lines with General Chemical’s Tile and Grout Cleaner 9700 using a bristle brush. Follow with the routine mopping procedure. |
|
|
Clean floors at least once a week. |
|
|
