Strippable  Coatings,Chemical Packaging,Paint Booth Maintenance Chemicals Strippable  Coatings,Chemical Packaging,Paint Booth Maintenance Chemicals Strippable  Coatings,Chemical Packaging,Paint Booth Maintenance Chemicals Strippable  Coatings,Chemical Packaging,Paint Booth Maintenance Chemicals Strippable  Coatings,Chemical Packaging,Paint Booth Maintenance Chemicals Strippable  Coatings,Chemical Packaging,Paint Booth Maintenance Chemicals
 
  Aluminum Processing
    Auto Care Chemicals
    Carpet Maintenance
 
    Cast On Strap Battery
    Container Cleaning
    Copper Brass Processing
 
   Deck and Paver Maintenance
   Foundry Chemicals
   Lubricants
 
   
  Marble Care
   Metal Lubricants
 
 Paint Booths
   Paint Strippers
   Peelable Coatings
   Polishes
 
 
 
Rolling Mill Lubricants
    Rust Inhibitors
 
 
  Soldering Fluxes
    Vanishing Oils
 
Carpet cleaners, Deck Paver Chemicals, Foundry Chemicals, Mold Release Agents, Paint Maintenance, Janitorial Cleaners, General Maintenace Cleaners, Specialty Cleaners, Paint Strippers, Booth Coatings, Temporary Coatings, Contract Chemical Packaging, Toll Manufacturing
Carpet cleaners, Deck Paver Chemicals, Foundry Chemicals, Mold Release Agents, Paint Maintenance, Janitorial Cleaners, General Maintenace Cleaners, Specialty Cleaners, Paint Strippers, Booth Coatings, Temporary Coatings, Contract Chemical Packaging, Toll Manufacturing
 
World Headquarters
General Chemical Corp
12336 Emerson Dr.
Brighton, Michigan 48116 USA
Tel :
248-587-5600
Toll Free
855-475-5600
Fax:
248-587-5606
Email: sales@generalchem.com
 
Carpet cleaners, Deck Paver Chemicals, Foundry Chemicals, Mold Release Agents, Paint Maintenance, Janitorial Cleaners, General Maintenace Cleaners, Specialty Cleaners, Paint Strippers, Booth Coatings, Temporary Coatings, Contract Chemical Packaging, Toll Manufacturing
Carpet cleaners, Deck Paver Chemicals, Foundry Chemicals, Mold Release Agents, Paint Maintenance, Janitorial Cleaners, General Maintenace Cleaners, Specialty Cleaners, Paint Strippers, Booth Coatings, Temporary Coatings, Contract Chemical Packaging, Toll Manufacturing
Carpet Cleaning Chemicals, Paint Booth Maintenance Chemicals, Foundry Chemicals
 
  buy now  
 
print icon
 
  GenLube_2200  
Vanishing Lubricant , Vanishing Oil and evaporative oil-Light Duty
Engineered exclusively for Aluminum, Copper, Copper alloys and Steel Copper/Brass

Light duty vanishing oil designed for stamping, Fin Machines, and roll forming on all metals.
INTRODUCTION :
 
VANISHING OIL is a  LIGHT DUTY solvent based Vanishing Lubricant designed for those applications wherein little oil film is permissible. Vanishing oil  2200   will  virtually disappear - at pre-determined intervals - thus completely  eliminating  need  for any further  cleaning, degreasing, buffing or polishing prior to shipping in many operations.

This product leaves a thin imperceptible film of lubricant that facilitates a clean die release of thin sheet or roll stock. The carrier generally dries in one to four hours. Normally, cleaning is not required after using vanishing lubricant.2200 specifically formulated for use in roll forming and  press operations on pre finished and other specialty metals.
Vanishing Lubricant,Vanishing Oil
Vanishing Lubricant and 
          Vanishing Oil-Light Duty

Gen-Lube 2200is designed for use where a “vanishing Lubricant” is required. 2200 is a premium quality, high performance, clear, low viscosity metal working fluid. 2200 evaporates readily leaving little or no residual oils for optimum cleanliness during metal working operation, while still providing excellent release properties.

2200’s prompt evaporation characteristics results in the manufacture of clean components, which will readily accept welds, allow for adhesion of paint to processed parts and leave virtually no residue to react with other processing chemicals.

2200contains select additives to provide optimum lubricity during metal stamping and forming, resulting in extended die life. The product formulation obtains the important balance of proper lubrication during metalworking, yet “vanishes” from parts in minimal time to avoid delays in the manufacturing process, and minimizing the need for manual cleaning of components. 2200is non-corrosive and non-staining to aluminum, copper, steel and their alloys.

Vanishing oil 2200should be used in stamping operations to keep the tools cool and prevent wear.
 
  • Suitable for ferrous and non ferrous metals
  • Ideal where rapid drying is required
  • Where surfaces are painted with oil paints
  • Burns clean in annealing ovens
FEATURES & ADVANTAGES :
 
Features Advantages
Excellent cooling and  lubricating
Acid & alkali stable
Non-corrosive to aluminum, copper and other non-ferrous metals and ferrous metals.
Environmentally friendly
Evaporates rapidly. Leaves virtually no residue and No Odor.
High Flash Point
Reduced toll wear and give excellent part finish.
Easily cleaned by acid or alkaline cleaner. 
Brightening not needed after cleaning.
Waste disposal does not require special reagents.
99% plus Volatile. Minimizes manual parts clean up. Easier to remove after forming operation.
Reduction of Fire risk with minimum dry times
 
APPLICATION :
 
  2200is designed primarily for use in light to light to moderate duty stamping and forming operations of ferrous and aluminum, copper and other non-ferrous metals, while still finding application in some light duty operations with ferrous metals. Its unique ability to provide “thin film” lubrication, then evaporate quickly leaving no residue, makes 2200an excellent choice for applications calling for the use of a “vanishing oil”. 2200can be applied by spraying or roller coating. 2200should always be used as received. 

Vanishing oil 2200can be applied straight  by spraying, dipping, brushing, flooding or roller coating methods. Caution should be taken when sprayed to not exceed the permissible exposure limits to oil mist.
 
Dilution Recommendations:
Application Dilution
Stamping Use as received
Header and Tank forming Use as received
Fin Forming Use as received
Up to 14 (gauge) thickness
  Note: 2200should be stored at temperatures between 65°F and 90°F to preserve its integrity. However, if residue on parts is going to be further dried in an oven, operating temperatures should be kept below 250°F to avoid decomposition.

Caution:
Product contains solvent. Use mechanical ventilation and guard against open flames or other ignition sources.
 
PROPERTIES :
 
Typical physical and chemical properties
Test Test Method Results
Specific Gravity @ 60°F ASTM D-1298 0.895
Pensky-Martens Closed Cup Flash Point, °F(°C) ASTM-D-93 125°F (52°C)
Cloud Point , °F(°C) ASTM-D-2500 45°F (7°C)
Color, Saybolt (min) ASTM-D-156 +25
Copper Corrosion 3 hr. @ 212 °F ASTM-D-130 1A 1A(Pass)
 
  Your partner in performance  
print icon
  Note: The information presented herein is our interpretation of certain test results and field experience to date. The information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification  
     
  Terms & Conditions | Privacy Policy | Links | Warranty | Sitemap | PRESS RELEASE | FAQ'S | DISTRIBUTOR OPPORTUNITY | PRIVATE LABEL  
   
 
Rss Feed